Technical

· 10/100/1000 Base-T, and XFP
· Up to 192 GE Ports
· Up to 192 GE PoE Ports
· Up to 64 10GE Ports
· 2 Open Slot for CPU Modules and 4 Open Slots for I/O Modules
· MAC Address Table Size 32K
· Packet Buffer 2MB
· Jumbo Frame 9220 Bytes
· Up to 1536Gbps Switching Capacity
· Up to 952.38 Mbps Packet Forwarding Rate
· Support 802.1d/1w/1s
· Support 802.3ad Link Aggregation, Max 128 Groups per System
· Support Max 3 Mirror Groups
· Support Traffic Segmentation
· IGMP Snooping:
  -Support IGMP v1.v2.v3 Snooping
  -Max 2048 Snooping Groups
  -Support up to 2048S tatic IGMP Snooping Groups ,
   which share with dynamic ones
  -Per Port or Per VLAN IGMP Snooping
· 4095 VLAN Groups
· GVRP Advertisement Support Both Dynamic and Static VLAN
· GVRP can be disabled/enabled per port or per system basis
· MAC-based VLAN Supports 1024 Entries
· Subnet-based VLAN Supports 256 Entries
· 802.1ad Q in Q
  -Support Port-based Q-in-Q
  -Support Selective Q-in-Q to add SVLAN Tag Based on
    MAC address
    CVID
    802.1p priority
    Ether type
    IPv4/v6 Address
    TCP/UDP port number
  -Support Untagged/Single Tagged/Double Tagged at Same Physical Port
· VLAN Translation
  -Support CVID Translation Based on Physical Port and ACL
· Support ISM VLAM
· Support 512 IP Interface
· Maximum 5 IP Addresses per VLAN Interface
· VRRP
  -Owner/Non-owner Ping Response
  -Support Text Authentication
· Routing Table: Total 12K Routing Entries Shared by IPv4/v6 External Route
  -Each IPv4 Route Consume 1 Entry
  -Each IPv6 Route Consume 2 Entries
· L3 Forwarding Table: Total 8K L3 Host Entries Shared by IPv4/v6 Unicast and Multicast
  -Each IPv4 Route Consume 1 Entry
  -Each IPv6 Route Consume 2 Entries
  -Each IPv4/v6 Multicast Route Consume 4 Entries
· Static Route:
  -Support 256 IPv4 Static Routing Entries
· Support RIP v1/v2 and Text / MD5 Authentication
· OSPF:
  -OSPF v2
  -Stub/NSSA Area
  -Equal Cost Multi
  -path Route
  -Support Text/MD5 Authentication
· Route Preference
  -IPv4 Static Route
  -RIP
  -OSPF (Intra/Inter/External)
· Secondary Route
  -Static Route
  -Default Route
· Route Redistribute
  -IPv4 Static Route
  -Default Route
  -RIP
  -OSPF
· Passive Interface
  -RIP
  -OSPF
· Multi Path Routing
· Support ECMP (Equal Cost Multi Path) for Following Route Types
  -Static Route
  -Default Route
· 2048 L3 IP Multicast Groups
· 802.1X:
  -Support Port-based Access Control
  -Support MAC-based Access Control, maximum 16 MACs per port
  -Support EAP, OTP, TLS, TTLS and PEAP
· RADIUS Auth. for Mgmt Access
· TACACS+ Auth. for Mgmt Access
· CLI:
  -Editable CLI Login Banner
  -Editable CLI System Prompt
  -Telnet Server supports IPv4 Access
· SNMP
  -Support SNMP v1, v2c, v3
  -Support IPv4 Access
· SNMP Trap on MAC Notification
· RMON v1: Support 4 Groups
· RMON v2: Support Probe-config group
· Trusted Host
· DHCP Client
  -Support IPv4
  -DHCP Auto-configuration
· Support IPv4 Log Server
· Support 64bits Statistic Counter
· Trap/ Log Severity Control
  -Support 3 Severities of Logs
  -Configurable Severity for Each Log
· Support 4 Level User Account with Secrete Password
· Multiple Image and Configuration
· TFTP Client
· Port Description
· Support Local Real-time Clock or SNTP Time Setting
· Support Web/ CLI/ SNMP Monitoring
· Support IPv4 Ping
· Support IPv4 Trace Route
· System Information Collection
· MIBII
· Bridge MIB
· SNMPv2 MIB
· RMON MIB
· RMONv2 MIB
· Ether-like MIB
· 802.3 MAU MIB
· 802.1p MIB
· IF MIB
· RADIUS Authentication Client MIB
· IGMPv3 MIB
· RIPv2 MIB
· OSPFv2MIB
· IP Forwarding Table MIB (CIDR)
· VRRP MIB
· IPv4 Multicast Routing MIB
· PIM MIB for IPv4
· RADIUS Accounting Client MIB
· Ping MIB
· Trace out MIB
· L2 Specific MIB
· L3 Specific MIB
· Private MIB